Crosley Radio Stereo System CR12 10 User Manual

19-08-08  
WARRANTY  
Crosley Radio Products are warranted against defects in material and  
workmanship for a period of 90 days beginning from the date of sale to the  
original purchaser.  
CR1201A  
Should the unit fail under normal usage during the 90 day warranty period, a  
request for RETURN AUTHORIZATION (R.A.) must be made by the original  
customer before returning the unit. Call Crosley Radio customer service for  
Return Authorization at (502) 583-4246 from 9 AM to 5 PM (EST) Monday to  
Friday.  
10 CD Jukebox with iPod  
Upon receiving the RETURN AUTHORIZATION number from the Customer  
Service Department, properly pack your unit in its original packaging. Include  
any adapters, parts, & accessories which were originally provided with the  
product, along with a check or money order for $19.95 made out to Crosley  
Radio to cover the handling and return postage. Display the R.A. # on the  
outside of the carton and ship PREPAID via standard UPS or its equivalent.  
Instruction Manual  
ATTN: RETURNS DEP'T  
2001 PRODUCTION DRIVE  
BAY 2 & 3  
LOUISVILLE, KY 40299  
CROSLEY RADIO assumes no responsibility for units sent without prior Return Authorization.  
The purchaser’s bill of sale is the only proof of warranty entitlement and must accompany the unit.  
The warranty does not cover damage due to acts of nature, accident, misuse, abuse, negligence, commercial  
use or modification of, or to any part of the product. This warranty does not cover damage due to improper  
operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than  
a facility authorized by Crosley Radio to service the product. This warranty does not cover products sold  
AS IS or consumables (such as fuses or batteries). This warranty is valid only in the United States.  
This warranty gives the purchaser specified legal rights in addition to any rights which may vary from state  
to state.  
In accordance with the "Moss-Magnuson Warranty Act" of July 10, 1975, this is termed a "limited warranty"  
which in no way compromises Crosley Radio‚ high standards of Quality and Workmanship.  
910-280500-0010-100  
 
Basic Operation  
Control Locators  
1
Unit Controls  
iPod Operation  
The Jukebox features the iPod Dock that uses dock  
adapters that come with newer iPod models. Before  
inserting your iPod, you will need to install the correct  
dock adapter. By using the correct dock adapter,  
you can insert any iPod with a dock connector. If  
you have an older iPod model that did not come  
with a dock adapter, they are available on our website  
Crosley. While docked, the Jukebox will also charge  
your iPod. To connect your iPod, follow the steps  
below.  
3
4
Press the Power button(4/47) to turn Jukebox on.  
1) iPOD DOCK  
2) MAGAZINE’S DISC  
EJECT SWITCH  
3) LIGHT POWER  
4) POWER BUTTON  
5) SPEAKER  
6) LCD DISPLAY  
7) SENSOR  
8) BACK SKIP  
9) FORWARD SKIP  
10) MODE  
11) BAND / LOUD  
12) MUTE  
13) AUTO MEMORY STORE /  
PRESET SCAN  
Browse your iPod for songs and press the  
Play/Pause button(22/39). Your music should  
begin to play.  
5
Press the Forward Skip (9) or Back Skip (8)  
buttons to select a new song.  
3
4
6
7
Adjust the volume to your desired listening level.  
1
2
Insert the correct dock adapter that fits your  
iPod. Your iPod should fit snugly into the correct  
adapter. Gently press the adapter until it snaps  
firmly in place.  
To remove the dock adapter, push your fingernail  
into the slot in the back of the adapter and lift  
up.  
5
Connect your iPod as shown in the illustration  
below.  
6
14) VOLUME DOWN  
15) EQ - SELECT  
2
EJECT  
7
SENSOR  
16) SELECT  
17) VOLUME UP  
23  
22  
21  
20  
19  
VOLUME  
8
9
10  
11  
1
3
5
PAU  
REP  
SCN  
SHF  
2
4
6
TUNE  
SKIP  
SEL  
EQ  
LOUD  
18) MEMORY 6 / DISC UP  
19) MEMORY 5 / DISC DOWN  
20) MEMORY 4 / SHF  
21) MEMORY 3 / REPEAT  
22) MEMORY 1 / PLAY / PAUSE  
23) MEMORY 2 / SCN  
24) POWER PLUG  
25) STAGE LIGHT STOP &  
RUN SWITCH  
MOD  
AMS  
BND  
D.DN  
D.UP  
MUT  
12  
13  
18  
17 16 15 14  
26) ANTENNA JACK  
27) COOLING FAN  
28) SPEAKER SWITCH  
(EXT. / INT. / MIX.)  
29) EXT. SPEAKER  
25  
26  
27  
28  
29  
24  
11  
4
 
Basic Operation  
Getting Started  
Unpacking  
Radio Operation  
1
2
To select stations:  
4
To locate your saved stations:  
1
Remove packing materials from unit.  
Note: Save all packing materials.  
On the AM/FM radio push the Power button(4/47)  
to turn the unit on. Next press the MODE  
button(10/30) to select between CD or Radio  
mode. The LCD display will show FM 1, FM2,  
FM3, AM 1,or AM 2.  
Select the band by pressing MODE button(10/30)  
to toggle between CD Player / Radio. Press  
BAND (11/32) to scroll through band selections  
FM 1 through AM 2. If you have stations saved at  
the FM 1 display, use button numbers 1 through  
6 to find stored channels in that section.  
2
3
Remove plastic safety cover from A/C plug.  
Remove tie from A/C cord  
NOTE: The FM 1, FM 2, etc. are not different  
FM bands. There are actually only two bands, FM  
or AM. The numbers 1, 2,3, on FM and numbers  
1,and 2 on the AM band allow you to save up to  
six of your favorite stations in each selected "band".  
Press BAND(11/32) to move to FM 2, then use  
buttons 1 through 6 to scroll through the saved  
channels in the FM 2 location. Repeat for each  
additional band mode. You can also let the  
system automatically scan through your preset  
stations. To automatically scan your presets,  
press the AMS button(13/44) and hold for less  
than 2 seconds. When it reaches a station that  
you wish to listen to, press AMS button(13/44)  
again to halt the scan.  
Power Source  
To select the first FM station:  
Press the Band button(11/32) to select the  
desired listening band. Press the Forward Skip  
(9) or Back Skip (8) buttons to seek the next  
available station. To manually search for stations,  
Press and hold either the Forward Skip (9) or  
Back Skip (8) button until the display reads  
“MANUAL”. Then repeatedly press the Forward  
Skip (9) or Back Skip (8) buttons to reach the  
desired station.  
1
2
Unwind the AC POWER CORD (24) at the back  
of the unit and connect it to a power outlet.  
Plug A/C cord into appropriate outlet.  
5
Adjusting the Volume, Bass, Treble and  
Speaker Balance:  
To adjust the Volume press the round SELECT  
button(16/33) located near the center of the  
control console. The LCD display will show VOL.  
Next press the arrow up(17) or arrow down(14)  
located on the large Volume button.  
Hold until the desired sound level is reached.  
The level will display as 0 through 15 in the  
LCD display window.  
NOTE: The tuner will default back to AUTO  
search mode 7-10 seconds of not being used.  
AC  
Polarized Plug  
3
Saving your station to MEMORY:  
Note:This product may be equipped with a  
polaized alternating-current line plug (a  
plug having one blade wider than the  
other.) This plug will fit into the power  
outlet only one way. This is a safety  
feature. If you are unable to insert the plug  
fully into the outlet try reversing the plug,  
if the plug should still fail to fit, contact  
your electrician to replace your obsolete  
outlet. Do not defeat the safety purpose  
of the polarized plug.  
Now that you have selected a station you may  
save it as one of your "Favorite Presets" so that  
you can quickly return to it later if you wish. You  
will notice the buttons on the left side of the  
control panel are numbered 1 through 6. The  
Memory function lets you save up to 6 of your  
favorite stations in each "band" mode. A total of  
30 stations can be stored in the memory.  
To set the BASS level press the SELECT(16/33)  
repeatedly until your see BASS display on the  
LCD screen. Next use the large Volume button to  
increase or decrease the BASS sound. The level  
range will display between -10 through +10 in the  
LCD display window. Release the Vol button  
when the desired level is reached.  
If you have selected FM 1 as outlined above  
and are ready to save your first station to memory,  
press 1 and hold it for at least 2 seconds. You will  
hear a "beep" when you press. Continue to hold  
and in about 2 seconds you will hear a second  
beep. This confirms that your station has been  
saved. Now, if you will notice in the LCD display  
you will see that you are in section FM 1, your  
selected station frequency is displayed in the  
center and on the right side of the LCD your first  
saved selection is shown as CH 1.To add a  
second preset station, use the Tune(8) or Skip(9)  
button to locate the next station you want to save,  
then press and hold button number 2 on the left  
side of the control panel. You may add up to 6  
stations in the FM 1 section. To save more stations,  
repeatedly press the BAND button (11/32) to  
advance to FM 2, FM 3, etc. and repeat the  
above steps to locate and save more stations.  
To listen to stations on the AM Radio band,  
repeatedly press the BAND button (11/32) until  
you see AM 1 or AM2. Then use the Tune(8) and  
Skip(9) button to scroll through the AM stations.  
You may also save up to 6 AM stations in each  
To adjust the Treble sound, repeatedly press the  
SELECT button(16/33) until TREBLE is shown in  
LCD display. Treble range is also -10 through+10.  
Press and hold the Vol up or Vol down button until  
desired treble level is reached.  
3
Plug A/C cord into appropriate outlet.  
To adjust the speaker balance press the SELECT  
button(16/33) repeatedly until BALANCE is  
shown in the LCD display window. Then press  
and hold the Vol up or Vol down until the desired  
balance is reached. Range of 0 through 10 in each  
direction is shown in the display window.  
6
Mute:  
To quickly silence the sound in either theCD or  
AM/FM Radio mode, press the MUTE button  
(12/37) located in the lower right of the front  
control panel. You will see "Mute" display in  
the LCD window if this function is activated.  
A
M section. Remember you must turn off the lights  
& bubble tubes to receive stations in the AM mode.  
9
6
 
IMPORTANT SAFETY INSTRUCTION  
General  
PLEASE READ CAREFULLY ALL THE FOLLOWING IMPORTANT SAFEGUARDS  
THAT ARE APPLICABLE TO YOUR EQUIPMENT  
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.  
2. Retain instructions - The safety and operating instructions should be retained for future reference.  
3. Heed Warnings - All warnings on the product and in the operating Instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions should be followed.  
Troubleshooting  
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use  
a damp cloth for cleaning.  
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards.  
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or  
laundry tub; in a wet basement; or near a swimming pool; and the like.  
8. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven  
surfaces may cause the product and cart combination to overturn.  
There’s no sound?  
CD Player malfunctions with one of the  
following problems:  
1
2
Make sure the mute function is turned off.  
Check that the volume is turned up by pressing  
vol.+ button on remote.  
1
The loaded disc will not play or the system  
changes to the next disc before the selected  
disc has a chance to play.  
9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable  
operation of the product and to protect it from overheating, and these openings must not be blocked  
or covered, The openings should never be blocked by placing the product on a bed, sofa, rug, or  
other similar surface. This product should not be placed in a built - in installation such as a bookcase  
or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.  
10. Power Sources - This product should be operated only from the type of power source indicated on the marking label,  
if you are not sure of the type of power supply to your home. Consult your product dealer or local power company. For  
products intended to operate from battery power, or other sources, refer to the operating instructions.  
11. Grounding or Polarization - This product may be equipped with a polarized alternating-current line plug (a plug having  
one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you  
are unable to insert the plug fully into the outlet try reversing the plug, If the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.  
12. Power - Cord Protection - Power - supply cords should be routed so that they are not likely to  
be walked on or pinched by items placed upon or against them, paying particular attention to  
cords at plugs, convenience receptacles, and the point where they exit from the product.  
3
Make sure ext. /int. /mix. switch on back of radio  
is on “int.” or “mix.”.  
2
3
The same disc is played over and over again.  
(unless you are using external speakers, in  
which case it should be on “ext.”.)  
These symptoms usually occur when there are  
burrs on the center hole or the outside  
circumference of the disc.  
4
Check to make sure power is turned on.  
4
Small burrs can prevent the disc from loading  
properly. In most cases you can use the side  
of a ball point pen or similar object to smooth  
the burrs.  
Bubble Tubes not bubbling?  
It can take the heaters 10 to 15 minutes to heat the  
liquid enough for bubble action to begin. If they have  
not started after this amount of time, very lightly tap  
the bottom of the tubes with your fingernail to start  
the tubes bubbling.  
AC  
13. Lightning - For added protection for this product during a lightning storm, or when it is left  
Polarized Plug  
Warning: Although there is a protective film being  
marketed as a CD accessory, use of these products  
will result in malfunctions and should absolutely be  
avoided.  
unattended and unused for long periods of time, unplug it from the wall outlet and disconnect  
the antenna or cable system. This will prevent damage to the product due to lightning and power - line surges.  
14. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,  
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.  
15. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result  
in a risk of fire or electric shock.  
Poor reception or no apparent sound  
with radio in AM or FM mode?  
Remote not working?  
16. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch  
dangerous voltage points or short - out parts that could result in a fire or electric shock. Never spill liquid of any kind  
on the product.  
17. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
1
2
Replace batteries.  
Be sure and point remote towards remote  
sensor when using.  
The Jukebox uses an external antenna. If the antenna  
is not connected to the 75 ohm plug on the back  
of the Jukebox, reception of both AM and FM stations  
will be poor. In most instances with no antenna  
connected, it will seem as if the sound is not working.  
18. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel  
under the following conditions;  
3
Remove obstacles in the path of the remote  
and the radio so that remote signal has a  
straight path to the radio.  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the product.  
c. If the product has been exposed to rain or water.  
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper adjustment of other controls may result in damage and  
will often require extensive work by a qualified technician to restore the product to its normal operation.  
e. If the product has been dropped or damaged in any way.  
AM Radio and Bubble Tubes?  
Due to interference caused by the Neon Lights, the  
AM Radio will only function properly with the lights  
turned off.  
f. When the product exhibits a distinct change in performance - this indicates a need for service.  
19. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement  
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions  
may result in fire, electric shock, or other hazards.  
20. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety  
checks to determine that the product is in proper operating condition.  
21. Wall or ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.  
22. Heat - The product should be situated away from heat sources such as radiators. Heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful intereference to radio or  
television reception, which can be determined by turning the equipment off and on , the user is encouraged to try to correct  
the interference by one or more of the following measures:  
-
-
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio TV technician for help.  
14  
 
Basic Operation  
Welcome  
Table of Contents  
Thank you for purchasing the Crosley 10 CD Jukebox  
with iPod (CR1201A). Before operating this unit,  
please read this manual thoroughly and retain it for  
future reference.  
Control Locators  
Remote Control  
Unit Controls.......................... 4  
Remote Controls.................... 5  
Using The Remote  
Using the Remote to save your favorite radio  
stations to Memory:  
The remote will control the following functions on  
the CR1201A:  
About This Manual  
Instructions in this manual describe the control functions  
of the Crosley 10 CD Jukebox with iPod(CR1201A).  
1
You may use the remote to save your favorite  
stations to memory so you can quickly return to  
them at a later time. You will notice the buttons  
on the lower part of the control are numbered  
1 through 6. The Memory function lets you save  
up to 6 of your favorite stations in each "band"  
mode. A total of 30 stations can be stored in the  
memory.  
Getting Started  
1
2
Power(47): Press to turn the Jukebox On / Off.  
Unpacking.............................. 6  
Power Source......................... 6  
Mode(30): the mode button selects between  
the CD Player or AM/FM Radio mode.  
3
Mute(37): Press mute to silence the sound from  
either the CD Player or AM/FM Radio. Press  
again to restore sound to previous level.  
Base Operation  
Use the MODE button(30) to select radio  
mode.Then press BAND(32) to select one of  
the available bands. For this example we will  
choose FM 1.  
4
Band(32): The band button is used to navigate  
through and select the band options,FM 1, FM2,  
FM3, AM 1 or AM 2. Press repeatedly to move  
through the selections.  
CD Operation......................... 7-8  
Radio Operation..................... 9-10  
iPod Operation....................... 11  
Remote Control...................... 12  
5
6
7
Backward Skip(34) : Press to skip back to the  
previous track in CD Player mode or to tune  
down in frequency in the AM/FM radio mode.  
Press and hold the skip back button for at least  
1 second to seek back to the first station with a  
strong signal. However the seek will miss many  
of the weaker stations. Repeatedly press the  
Tune or Skip button to find the most stations.  
2
Next, use the skip forward(45) or skip back  
(34) button to scan through the stations and  
choose your first one to save. When you have  
selected a station, press number 1 on the remote  
and hold it for at least 2 seconds. You will hear  
a "beep" when you press. Continue to hold and  
in about 2 seconds you will hear a second beep.  
This confirms that your station has been saved.  
Now, if you will notice in the LCD display you  
will see that you are in section FM 1, your  
selected station frequency is displayed in the  
center and on the right side of the LCD your first  
saved selection is shown as CH 1. To add a  
second preset station, use the skip forward(45)  
or skip back(34) button to locate the next station  
you want to save, then press and hold button  
number 2 on the remote keypad.You may add  
up to 6 stations in the FM 1 section. To save  
more stations, repeatedly press the BAND button  
(32)to advance to FM 2, FM 3, AM 1 etc. and  
repeat the above steps to locate and save more  
stations. You may save up to 6 stations in  
each "band".  
General  
Connection Optional  
Equipment.............................. 13  
Light / Bubble Tubes.............. 13  
Troubleshooting .................... 14  
Warranty................................. 15  
Forward Skip(45): Press to skip forward to the  
next track in CD Player mode or to tune up in  
frequency in the AM/FM radio mode. Press and  
hold the skip forward button for at least 1 second  
to seek forward to the first station with a strong  
signal. However the seek will miss many of the  
weaker stations. Repeatedly press the Tune or  
Skip button to find the most stations.  
Select(33): With the system in either CD Player  
or AM/FM radio mode, repeatedly press the  
select button to choose mode of volume, bass,  
treble, or balance. Then use the volume up or  
volume down button to increase or decrease  
the level of selected mode.  
8
9
Volume Up(31) and Volume Down(35)  
Use the select button to choose volume, bass,  
treble, or speaker balance. Then use the volume  
up / volume down button to control level of each  
selected mode.  
3
To locate your saved stations: Select the band  
by pressing MODE button(10/30) to toggle  
between CD Player / Radio. Press BAND  
button(32) to scroll through band selections  
FM 1 through AM 2. If you have stations saved  
at the FM 1 display, use button numbers 1  
through 6 to find stored channels in that  
section. Press BAND(32) to move to FM 2,  
then use buttons 1 through 6 to scroll through  
the saved channels in the FM 2 location. Repeat  
for each additional band mode.  
CD +(42) : In CD Player mode, press to move  
up to the next disc.  
10 CD -(41): In CD Player mode, press to move  
back to the previous disc.  
11 REPEAT(43): In CD Player mode, press to  
repeat the currently playing track. Press again  
to cancel action.  
12 SCAN(36): In CD Player mode, press the scan  
button to hear at least the first 10 seconds of  
each track. Press again to cancel action.  
12  
 
Control Locators  
Basic Operation  
Remote Controls  
Radio Operation  
·
Jukebox / iPod Function  
30) MODE  
31) VOLUME UP  
32) BAND  
33) SELECT  
34) BACK SKIP  
35) VOLUME DOWN  
36) SCAN / MENU  
37) MUTE  
7
8
FM Stereo:  
NOTE: When you start the auto search it will  
begin from the station you are currently set at.  
For example if you are at 101.3 on the FM  
frequency, the search will begin there and search  
up through the FM frequency range until it finds  
the first 6 signals.  
If the station you are receiving is broadcasting  
in stereo you will see “ ” displayed in the left  
of the LCD display.  
Note: If the station is not broadcasting in Stereo,  
You will not see the Symbol “  
display.  
30  
31  
47  
BAND  
EQ  
” of the LCD  
32  
33  
46  
45  
The unit has a feature to reinforce the  
BASS sound. This feature works especially well  
when listening at low volume levels. The LCD  
display will indicate "LOUD" when this feature is  
active. This feature can only be set by using the  
Loud button on the control panel.  
34  
AMS ~ Auto Memory Store/ Preset Scan  
Features:  
To automatically scan through your preset  
stations, press the AMS button(13/44) and  
hold for less than 2 seconds. This will start the  
automatic scan which will search through all of  
the preset program positions. Example: If you  
are listening to band F 1 ch1, and press AMS  
button(13/44) it will search the six positions  
on F 1 then skip to F 2 and search all 6  
positions then skip to F 3, etc. pausing for a few  
seconds on each program. When it reaches a  
program (station) that you wish to stop on,  
press AMS button(13/44) one more time to  
halt the search. Also, if you wish to manually  
scroll through the preset programs you can  
"double click" the AMS button(13/44) to advance  
from one saved station to the next. The AMS  
can also search for and save the stations it  
finds as preset memory locations. To activate  
this feature, select any band mode, FM 1  
through AM 2. Then press and hold the AMS  
button(13/44) for more than 2 seconds.  
The system searches and stores the first six  
stations it finds in the preset memory locations  
for that selected band, (example, if you selected  
F 1 anstarted the search, it stored the stations  
found as ch 1 through ch6 in band F 1).  
Press BAND(11/32) to advance to the next band  
and repeat the search to store 6 more stations.  
Continue through all bands to store the maximum  
of 30 preset stations.  
35  
36  
38) 2(SCN)  
9
SCAN:  
MENU  
ENT  
39) 1(PAU) / PLAY & PAUSE  
40) 4(SHF) / RANDOM  
41) 5(CD-) / DOWN ARROW  
42) 6(CD+) / UP ARROW  
43) 3(RPT) / REPEAT  
44) AMS / ENTER  
45) FORWARD SKIP  
46) EQ  
In radio mode, pressing the SCAN button  
(23/36)will start INTRO station, after three  
seconds of each will be next station receiver,  
if the SCAN button (23/36) is pressed again,  
it unit return to normal station mode.  
AMS  
37  
38  
39  
44  
43  
DOWN  
UP  
40  
41  
42  
CD  
CD+  
47) POWER  
Switch to iPod Remote Function  
Once iPod inserted into the docking, iPod will play.  
All other functions will stop immediately and the  
remote function will change to iPod mode.  
5
10  
 
Basic Operation  
Basic Operation  
CD Operation  
CD Operation  
To Play a CD Using The Buttons on The Front  
Control Panel:  
1
Loading discs into the magazine  
Pull out one tray at a time and place a CD on  
the tray with the CD label surface facing down.  
Next, slide the loaded tray back into the  
magazine. Pull out the next tray and load the  
second disc. Up to ten CD's can be loaded.  
NOTE: Always keep the CD cartridge bay  
door closed, even as you have unloaded the  
cartridge and are preparing to put new CDs  
into it. Keeping the door closed will minimize  
the possibility of jamming the cartridge.  
INSERT EACH COMP  
THE LABEL  
SURF  
ACT DISC WITH  
ACING DOWN  
1
2
Push the Power button(4/47) to turn the unit on.  
ACE  
F
Next press the MODE button(10/30) on the  
center control panel to select CD mode.  
The LCD display will show CdC. The system  
will automatically select and load the first disc.  
The current playing track will be shown in  
center of the display screen. Example:T-01  
for track number 1. The current playing Disc  
number is shown in smaller red letters to the  
right on the LCD screen.  
Label Side Down  
Push to slide open  
2
3
To load the magazine into the CD player, slide  
the door to the right as shown in the photos.  
Check to make sure that you have the magazine  
positioned so that the top side is up and that it  
is pointed in the right direction for installation.  
You should be able to see the writing and disc  
numbers on the front after it is inserted.  
3
4
To change tracks on the current playing disc:  
Press the Forward Skip (9) or Back Skip (8)  
buttons to move to the next or previous track.  
Push in until the magazine locks into place.  
When the magazine is used for the first time, it  
will not lock into place unless the power supply  
has been connected. You should hear the CD  
Player cycle and begin to load a disc within a  
few seconds after the magazine is locked into  
place. To eject the magazine, press the eject  
button as shown in the photo at right.  
Eject button  
To change to a different disc:  
Press the DISC.UP button(18/42) to move up  
to the next disc or the DISC.DOWN(19/41) button  
to move down to the next available disc.  
EJECT  
5
6
To repeat the current play track:  
Press the REPEAT button(21/43).  
NOTE: Be sure to close door after you have  
ejected or inserted the magazine. Dust or dirt  
can cause malfunctioning of the CD player.  
To hear the beginning of each track:  
Press the SCAN button(23/36) to hear at  
least the first 10 seconds of each track on  
the selected disc.  
EJECT  
Warning: When the CD cartridge bay is open  
do not put your hand or any other object inside.  
There is a small button located on the left side,  
inside the cartridge holder. That button is  
automatically positioned all the way to the right  
when the cartridge is removed. If the button is  
moved to any other position it will cause the  
cartridge to become permanently stuck when it  
is put back. This will mean you cannot eject the  
cartridge. This is not a warranty repair and  
it may be necessary to have a technician  
remove the CD player and return it to us  
to be reset.  
7
Random Play:  
To let the system randomly select  
and play tracks from the selected disc,  
press the RANDOM button(40).  
INSERT EACH COMP  
THE LABEL  
SURF  
ACT DISC WITH  
ACING DOWN  
ACE  
F
4
The picture on the right hand side shows the  
inside of the CD cartridge bay as it looks with  
the CD magazine removed. The stuck cartridge  
condition noted at right only occurs if someone  
has moved the button.  
NOTE: Always keep the CD cartridge bay door  
closed, even as you have unloaded the cartridge  
and are preparing to put new CDs into it. Keeping  
the door closed will minimize the possibility of  
jamming the cartridge.  
7
8
 

Cooper Lighting Work Light MCL5 User Manual
Curtis Flat Panel Television LCD2226 User Manual
Cypress Computer Hardware CY7C1223H User Manual
Digital Foci Digital Photo Frame PAD 280 User Manual
Dixon Lawn Mower 422 424 User Manual
Extron electronic Stereo Receiver DVI RGB 200 User Manual
Foster Two Way Radio 7325 440 User Manual
Garmin Computer Monitor TR 1 User Manual
GE Air Conditioner AZ28E12D User Manual
GE Air Conditioner AZ75E18DAC User Manual