ELECTRIC GUITAR
AES820 D6
SERVICE MANUAL
The AES820 D6 service manual provides a listing of
only the differences as compared with the AES820.You
must have a AES820 service manual (EG 011618 )
before servicing this unit.
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/
electronic and/or plastic (Where applicable) components may also contain traces of chemicals
found by the California Health and Welfare Agency (and possibly other entities) to cause cancer
and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS INYOUR
MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not
inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product,
wash your hands before handling food.
CONTENTS
This document is printed on chlorine free (ECF) paper with soy ink.
011619
EG
HAMAMATSU, JAPAN
0.768K-66
Printed in J apan ’02.01
|